Log in

Log in

 

 

 

 

 

EMITE PT-Series RC

Non-signaling OTA of small devices for Production Testing

 

 

 

 

 

 

PT100 - Small-size Reverberation Chamber

Production 4-DUT parallel Testing of cellular and wireless technologies

SISO WLAN, 2G, 3G, 4G and 5G

 

PT100new                    PT



 

The PT100 Small Reverberation Chamber is a one-of-its-own OTA test chamber worldwide. With smart-stirring and capable of simultaneously testing up to 4 DUTs of up to 15cm and 5kg, the patented PT100 is intended for Production OTA Testing in non-signaling mode, providing unheard-of ultra-fast test times with good accuracy and repeatability and the second smallest footprint on the market. TxPower, RSSI and other non-signaling SISO and MIMO test figures of merit for SISO WLAN, 2G, 3G, 4G and 5G technologies, including Main/Diversity/All antenna switching, can be performed in very short test times.

With user-selectable technology, band, channel, bandwidth, antennas, and other parameters in an individual manner for each test, a batch of tests can be run in seconds, taking advantage of full parallel testing. The PT100 can also make use of an optional RF-I/O-filtered conveyor-belt for continuous testing of devices, providing an unheard-of and unique test capability for production lines. The embedded EMITE barcode reader, UE App and Bluetooth control uniquely identifies DUTs and test chamber in a room with a set of many chambers.

The chamber comes pre-calibrated for testing 1, 2, 3 or up to 4 simultaneous DUTs in different form factors with up to 15cm. Typical non-signaling complete batch testing times for 4 DUTs are around 210s. Typical 1 dB STD accuracy and repeatability (1.5 dB for 690 to 860 MHz). With up to 4 DUTs parallel testing capabilities, automated detection and usage of any eNodeB capability and overnight unsupervised measurements, PT100 holds incredible capabilities for Production Testing. 

 

Download Datasheet

 

 

 

 


 

 

PT50 - Small-size Reverberation Chamber

Production 8-DUT parallel Testing of cellular and wireless technologies

SISO WLAN, 2G, 3G, 4G and 5G

 

PT50 web min




pt2



The PT50 small-size Reverberation Chamber Series is the fastest OTA test chamber in the market. With smart-stirring and capable of simultaneously testing up to 8 DUTs of up to 15cm and 5kg, the PT50 is intended for Production OTA Testing in non-signalling mode, providing unheard-of extremely-fast test times with good accuracy and repeatability and the smallest footprint on the market. TxPower, RSSI and other non-signaling SISO and MIMO test figures of merit for SISO WLAN, 2G, 3G, 4G and 5G technologies, including Main/Diversity/All antenna switching, can be performed in very short test times.

With user-selectable technology, band, channel, bandwidth, antennas, and other parameters in an individual manner for each test, a batch of tests can be run in seconds, taking advantage of full parallel testing. The PT50 makes use of a 8-DUT carrousel on an internal turn table for extremely-fast testing of devices, providing an unheard-of and unique test capability for production lines in limited spaces. The embedded EMITE barcode reader, UE App, Bluetooth control and touchscreen PC uniquely identifies DUTs and test chamber in a room with a set of many chambers.

The chamber comes pre-calibrated for testing 1, 2, 3, 4, 5, 6, 7 or up to 8 simultaneous DUTs in different form factors with up to 15cm. Typical non-signaling complete batch testing times for 8 DUTs are around 300s. Typical 1 dB STD accuracy and repeatability (1.5 dB for 690 to 860 MHz). With up to 8 DUTs parallel testing capabilities, automated detection and usage of any eNodeB capability and overnight unsupervised measurements, PT50 holds unmatchable capabilities and test times for Production Testing.

Download Datasheet

 

 


 

 

Unique Features of PT-Series

 

wiot circle final
Small-device non-signaling Production Testing
Non-signaling | Devices up to 15cm and 5kg | 1.0 dB STD | Very Fast test times | No Reconnections
 
movl apps
Pre-calibrated Chamber and UE apps
Pre-calibrated in-house | VNA calibrations | UE App Android 
test circle
Parallel Testing with Full  Control
Up to 4 (PT100) or 8 (PT50) Simultaneous DUTs | gNB detection and optimization of use | Batch testing overnight without human supervision |No Reconnections
 

 

 


 

All in One Single and

Intuitive Graphic User

Interface 


The PT-Series Reverberation Chambers provide unique WLAN, 2G, 3G, 4G and 5G SISO non-signaling Figures of Merit, all united in one single and intuitive graphic user interface (GUI), allowing up to 4 (PT100) or 8 (PT50) simultaneous DUTs to be tested in batches in an unsupervised manner. The PT-Series GUI includes an API interface for customized test script design and for adding user-confidential proprietary chipset AT commands. Pass/Fail criteria can be set, providing excellent quality control of tested devices in a simplified manner. 
pt50 softpt100 software

For additional information or a personalized quotation, please contact EMITE at This email address is being protected from spambots. You need JavaScript enabled to view it..



Choose EMITE. Your MIMO wishes anticipated.